Doesn't seem familiar? Jump to the "Ultra" help about accessing tests.
On the Test or Survey Canvas, you can add, edit, and delete questions. You can also add question sets or random blocks, reorder questions, and edit a test or survey's information before students submit attempts.
After submissions exist, you can't add a question, modify the number of questions in a question set, or change a random block definition or options. You may be able to delete questions.
Access the Test Canvas in these ways:
- Grade Center > test or survey column heading menu > Edit Test
- Control Panel > Course Tools > Tests, Survey, and Pools > Tests > test's menu > Edit
- Content area > test's menu > Edit the Test
Doesn't seem familiar? Jump to the "Ultra" help about editing and deleting questions.
To make a change to a question, access the question's menu on the Test or Survey Canvas and select Edit.
Even after students submit attempts, you can delete questions. All affected test submissions are regraded and all affected survey results are updated. The question numbers update automatically.
On the Test Canvas, select the check box for each question to delete, and then select Delete and Regrade.
On the Survey Canvas, select the check box for each question to delete, and then select Delete and Update Results.
At the top of the page, you're alerted that you can't delete questions if a test or survey has attempts in progress. The Delete and Regrade function is removed.
You can change the possible points awarded for answering questions correctly in two ways. For both ways, new grades are recalculated for all previously submitted tests.
If you set the points possible to less than 1, letter grades may not be assigned correctly.
- On the Test Canvas, select a question's current points.
- In the Update Points box, edit the points, set the question as extra credit, or give full credit. To remove a question's extra credit or full credit designation, clear the appropriate check box. You can't set extra credit or partial credit for questions unless you chose the options on the Question Settings page.
- Select Submit or Submit and Regrade.
- On the Test Canvas, select the check box for each question you want to change.
- Preceding the questions list, type a number in the Points box.
- Select Update or Update and Regrade.
Doesn't seem familiar? Jump to the "Ultra" help about reordering questions.
Questions are numbered automatically in the order you add them. The question numbers update when you reorder or randomize them. Therefore, use caution when you refer to specific question numbers in the questions' text.
On the Test or Survey Canvas, you can use the drag-and-drop function to reorder questions. Press the arrows next to a question and drag it to a new location.
Or, select the Keyboard Accessible Reordering icon. Select a question and use the Move Up and Move Down icons to adjust the order.
Only new test attempts are affected by the changed order if the test isn't set to display questions in random order. Attempts already submitted retain the order as originally viewed by students when they took the test.
Doesn't seem familiar? Jump to the "Ultra" help about deleting tests.
You can delete a test or survey before or after you deploy it in a content area. Access the test or survey's menu and select Delete. If students haven't attempted to take the test or survey, you may safely delete it from the content area without any loss of data. You have removed it from the content area only. The test or survey remains on the Tests or Surveys page where you can edit, redeploy, or delete it from the system.
If no students have taken a test or survey and you delete it on the Tests or Surveys page, it's also removed from the content area.
After you delete a test or survey from a content area, you can deploy it again. No connection or shared data exists between the first and second deployments.
If students have already taken a test or survey, you can make it unavailable rather than delete it.
If you try to delete a test with attempts, a warning appears with these options:
- Preserve scores in the Grade Center for this Test, but delete all attempts for this Test. You can delete the test from the content area. Grades for this test will remain in the Grade Center, but the attempts will be deleted. You won't be able to view any of the students' responses or grade any questions after the deletion. The action is irreversible.
- Remove this content item, the Grade Center item for this Test, all grades for this Test, and all attempts for this Test. You can delete the test from the content area and erase any record of the test from the Grade Center. All records of student performance are removed permanently. The action is irreversible.
On the Tests or Surveys page, you can permanently delete tests or surveys. If Delete doesn't appear in a test or survey's menu, you have deployed it in a content area. You need to delete a deployed test or survey from the content area before you can delete it from the Tests or Surveys page.
Undeployed tests and surveys don't appear in the Grade Center, so when you delete them, the Grade Center isn't affected.
After you add the first question, select the plus sign wherever you want to add another question, type text, or upload a file. You can add as many text blocks and files as you want.
If you add questions to a test, you can't enable anonymous grading.
Students see the content just as you see it, without the editing options or the correct answer.
Before students open the test, open the menu to access Edit or Delete. To change the points, select the score pill and type a new value.
Select Align with goal from the menu to align goals with individual test questions to help your institution measure achievement. After you make the test available, students can view information for the goals you align with tests and questions so they know your expectations.
You can edit the text of most questions and answers, even after students have made submissions. For example, you may have chosen the wrong answer, found a typo, or want to adjust points or scoring options. You can make a change for all students to see and automatically update all grades.
Your update affects existing attempts, attempts in progress, and subsequent submissions. Student grades are updated, but the new grades may not appear immediately. Students see their updated grades in their activity streams.
If you make changes while students have the assessment open, they won't see the changes. They need to refresh the page or submit the assessment and open it again.
After students open the assessment or make submissions, you can make these changes:
- Edit the text of questions and answers
- Edit the point value
- New grades are recalculated for all previously submitted assessments
- Give everyone full credit for a question
- Change which answers are correct
- Change the scoring options for Multiple Choice and Matching questions
- Align questions with goals, from the assessment only
After students open the assessment, you can't make these changes:
- Add new questions and answers
- Delete a question
- Delete answers in Matching and Multiple Choice questions
- Change the number of blanks in a Fill in the Blanks question
- Move the content, such as switch the order of questions, answers, or additional content
- Add or remove questions from a question pool or delete a pool from an assessment
In an assessment or a student's submission, open a question's menu and select Edit/Regrade to make changes. You receive a warning after you save your changes if student submissions exist and regrading will occur.
If you edit a question in a question pool, the edits appear everywhere the question is used. For example, if you change the correct answer, the question is regraded in all assessments where the question is used. The same is true for edits you make in a source assessment's questions. Those edits affect all the question pools where the question appears.
The regraded score is applied to the attempt score. If you manually change the grade for the assessment in the gradebook, the regraded score doesn't change the override score.
You can give everyone full credit for a question you didn't explain clearly or doesn't accurately reflect your lecture or textbook material.
After you select Edit/Regrade in a question's menu, you can select the check box for Give full credit for question. After you give full credit, you can clear the check box to revert to the automatic grade or a previously assigned manual grade.
Your update affects existing attempts, attempts in progress, and subsequent submissions. Student grades are updated, but the new grades or reversal may not appear immediately.
When you give full credit, you can’t change student scores for an individual question. You can override each student’s assessment score to adjust the points.
After grading is completed and you show students the correct answers, they can see which questions you've awarded full credit. Full credit given appears next to the grade pill and is also noted in the answers section.
You can edit settings for the files you've added to questions. Select the file in the editor and then select the Edit Attachment icon in the row of editor functions. You can add a Display Name and Alternative Text.
You can also choose whether to insert the file as a link in the editor or to embed the file directly so it appears inline with other content you've added.
Doesn't seem familiar? Jump to the "Original" help about reordering questions.
Questions are numbered automatically in the order you add them. The question numbers update when you reorder. Before students open the test, you can reorder the elements of your test.
Point to a test item to access the Drag to reorder icon. Press and drag the question, text block, or file to a new location.
You can use your keyboard to move an item.
- Tab to an item's Drag to reorder icon.
- Press Enter to activate move mode.
- Use the arrow keys to choose a location.
- Press Enter to drop the item in the new location.
Doesn't seem familiar? Jump to the "Original" help about managing tests.
You can make changes to existing tests and change where they appear on your Course Content page. Be aware that if you change an existing test that students can access, some students may have started their submissions.
Press the Drag to reorder icon in a test's row to move it to a new location. You can also move a test into a folder.
In a test's row, open the menu to access the Edit and Delete functions.
You can change the test's due date and grade unit at any time, even after students have made submissions. Students' statuses, scores, and grade units will update also.
You can delete a test from your course and if no student submissions exist, the gradebook item is also deleted. For tests with submissions, you must confirm that you want to permanently remove the test, all submissions, and grades from your course.
Or, hide the test from students to preserve the submissions and the scores in the gradebook. Students can't access hidden tests on the Course Content page or on their grades pages even if you've graded submissions.
Other deletion considerations
You can’t delete the source tests for question pools from these areas:
- Course Content page
- Gradebook list or grid view
You also can't delete these items:
- Folders that contain source tests for question pools
- Question banks used in question pools