LIS 2.0 Integration Configuration

Configuring an LIS integration is straight forward provided you understand some basic principles of the SIS Framework and have an understanding of your integration goals as they relate to data life cycle. The following presents a basic defaults-based configuration followed by a description of how customization of the individual settings may impact the function of the integration.

LIS configuration

On the Administrator Panel, under Building Blocks, select Data Integration.
Select Student Information System Integrations.
Point to Create Integration to open the list.
Select the IMS Learning Information Services integration type.
On the next screen you are presented with the editable options for the configuration.

Integration properties

Integration Name	Required	Enter a unique name for the integration - this is the name shown in the list of configured integrations on the Student Information System Integrations page.
Description	Optional	Type a description for your integration. Useful for further identification of integrations.
Shared Username	Required	The Shared Username is generated automatically from the SIS system and populated to this text box. This is used for data post operations along with Shared Password. This field is not editable.
Shared Password	Required	Type the password generated from the SIS system.
SIS Learning Information Services Batch Web Service URL	Not Required	This field specifies the URL with which Learn will communicate to the Student Information System the status of Batch data processing. To learn more about batch processing, see LIS - IMS Learning Information Services.
Batch Service Username	Not Required	This field specifies the username required by the Student Information System for authorizing Batch data processing. To learn more about batch processing, see LIS - IMS Learning Information Services. Likely required if using the Batch Services.
Batch Service Password	Not Required	This field specifies the password required by the Student Information System for authorizing Batch data processing. To learn more about batch processing, see LIS - IMS Learning Information Services. Likely required if using the Batch Services.
Batch Download Username	Not Required	This field specifies the username required by the Student Information System for accessing Batch data. To learn more about batch processing, see LIS - IMS Learning Information Services.
Batch Download Password	Not Required	This field specifies the password required by the Student Information System for accessing Batch data. To learn more about batch processing, see LIS - IMS Learning Information Services.
Integration Status	Required	Integration Status options: Inactive: The system will not process requests or update data in the database. Active: The system will process requests, update data in the database, and be visible to the users. Testing: Data is not integrated into the live system. Blackboard recommends that integrations begin in Testing. Selecting this status will allow you to test the integration and fix any issues which may arise before committing to the integration. After testing is complete, the status should be set to Inactive or Active. To perform advanced configuration, an integration must be set to Testing of Active status.
Log Verbosity	Required	The Log Verbosity option determines what is visible in the SIS Logs screen for this integration. Errors Only: Any fatal issues, any issues preventing create, update, disable, or purge operations. Errors and Warnings: Any non-fatal issues, any issue with an individual record, or any successful operation which required a change to the record. All Diagnostic Messages: Any successful activity, including record types and counts, timing, and data. All Diagnostic and Debug Messages: All individual records, and data transformation attempts. Selecting a verbose log level will also select the less-verbose log level or levels that precede the selected log level. For example, if you select the Messages log level, errors, warnings, and messages will be logged.
Learn Data Source	Required	Determine the data source used during the integration with Blackboard Learn. Use the Learn Data Source defined in the inbound data Use the same Learn Data Source for all new inbound data. Select New Data Source from the drop-down list, and type the new data source key in the text box. Use the same Learn Data Source for all new inbound data. Select an existing data source key from the drop-down list. Data Source keys must be previously defined using the Data Source Management Tool (see Data Source Key Overview)
Batch Uid Prefix	Optional	Avoid ID conflicts by prefixing identifiers for objects created during the integration. Blackboard recommends that you do not change this setting after data has been created for the integration.

At this point the Learn configuration of a default LIS integration is complete and you may test it by setting the Integration Status to Test and submitting LIS formatted data files - see LIS Examples for starter files and SOAP testing examples and LIS Data format for examples.

Advanced integration settings

While the default settings are adequate under most conditions, your integration goals may pose requirements that necessitate further configuration changes. In some cases alignment between desired goals for Learn data management and SIS data management may not be possible. The advanced settings allow for in-Framework management of incoming data to enforce Learn data goals.

Advanced settings for an integration are possible through three points in the Student Information System Integration administrator interface:

Creating custom field mappings
Advanced Integration Settings Step 3 of an integration configuration.

Available Advanced Integration Settings for inserts and updates are:

Do Not Insert or Update: Ignore incoming data for this object.
Insert Only: Only add new objects; do nothing if an object matching this data external key exists.
Updates Only: Only update existing objects; do nothing if an object does not exist.
Smart Inserts or Updates (Default): If there is no matching object in Learn add it as a new object; if a matching object exists in Learn then update it with incoming data.

You may also determine what happens on data deletes when a delete process is being performed:

Do Not Disable or Purge: Do not delete or mark for deletion any object in the system based on the feed file.
Disable: Mark for deletion, but do not actually delete any objects in the system based on the feed file.
Purge: Delete object from the system based on the feed file.

The above settings may be applied to each object supported by LIS (as displayed in the UI). Changes to these settings from the defaults will enable fine-tuning the integration to provide object management beyond what is provided just by the data in the available SIS feeds.